SOP / protocol
Photoresist coating in the Keller Apogee® spinnerApogee spin coater
The cleanroom procedure documents photoresist coating with a Cee® 200 and outlines recipe selection, sample loading, and routine operation.
The stated 1/8-inch to 6-inch sample range and 6000 rpm limit describe the documented installation. They are not specifications for every current Apogee® configuration.
Revision 1 is dated August 25, 2023. The facility documents positive and negative photoresist use, with cleaning between chemistries, and identifies HMDS as an approved material. Its configuration accommodates samples from 1/8 inch to 6 inches and operates up to 6000 rpm. Those values describe the documented installation; the SOP does not identify a particular substrate material or experimental wafer diameter.
Washington State University Vancouver Cleanroom. 2023. Standard Operating Procedure: Spin Coating, Brewer Science CEE-200 Spin Coater. Revision 1. Revisionist: Sam Judd. August 25, 2023.
Equipment reference: Page 1, equipment identification and process description.
Open original source ↗Application summary prepared by Cee. The original source remains the authority for its methods and findings.
SEMICON EUROPA · 10–13 NOVEMBER
Meet Jacob, CEE’s Global Sales Director, in Munich with our partner SiSTEM Technology.
Stand C1353 · Messe München
Spin coating, bake and chill, temporary bonding and debonding.
Mention Jacob from CEE in SiSTEM’s booking form.