Paper / report

Toward Development of a Higher Flow Rate Hemocompatible Biomimetic Microfluidic Blood Oxygenator

A Cee® 300X Precision Spin Coater was used to fabricate thin silicone membranes for a biomimetic microfluidic blood oxygenator. The membranes separate the device's vascular and oxygen channels, connecting legacy Cee® coating equipment with experimental gas-exchange device fabrication.

How Cee® equipment is used

NuSil silicone was spin coated on a polished 300 mm silicon wafer at 1100 rpm for 60 s, with a 500 rpm/s ramp rate. The target membrane thickness was 50 µm. A trichlorosilane treatment enabled release from the wafer. The membranes rested at room temperature for 10 min before oven curing at 65 °C for at least 1.5 h. These are reported research conditions for this device. Source: Section 2.3, Membrane Fabrication.

Equipment reported
Cee® 300X
Source type
Research paper
Publication year
2021
Materials
NuSil Silicone
Substrate
Si
Source
Micromachines (MDPI)

Process context

The process details describe the cited work. Reported recipes and results depend on the authors’ materials, substrates, and equipment configuration. Materials recorded for this reference include NuSil Silicone.

Source and equipment evidence

Micromachines (MDPI). 2021. Toward Development of a Higher Flow Rate Hemocompatible Biomimetic Microfluidic Blood Oxygenator.

Open original source ↗

Application summary prepared by Cee. The original source remains the authority for its methods and findings.

SEMICON EUROPA · 10–13 NOVEMBER

Bring your process questions.

Meet Jacob, CEE’s Global Sales Director, in Munich with our partner SiSTEM Technology.

Stand C1353 · Messe München
Spin coating, bake and chill, temporary bonding and debonding.

Book a stand meeting →

Mention Jacob from CEE in SiSTEM’s booking form.