Paper / report

Resist coating for honeycomb cryo-ET specimen supports

Microfabricated honeycomb supports were produced to position elongated cells for cryo-electron-tomography preparation.

How Cee® equipment is used

The fabrication method identifies a spin coater as “Cee Apergee 450.” The designation is retained in the evidence record and presented as Apogee® 450 in the equipment summary.

Equipment reported
Apogee® 450 Spin Coater
Source type
Research paper
Publication year
2024
Materials
Not reported
Substrate
Not reported
Source
MRC Laboratory of Molecular Biology

Process context

The documented four-inch silicon wafer carries a copper layer. The Omnicoat process uses a spread step at 500 rpm for 5 seconds and a coat step at 3000 rpm for 30 seconds before subsequent resist processing.

Source and equipment evidence

Hale VL, Hooker J, Russo CJ, Löwe J. 2024. Honeycomb gold specimen supports enabling orthogonal focussed ion beam-milling of elongated cells for cryo-ET. Journal of Structural Biology. 216:108097.

Equipment reference: PDF page 7, Section 4.1, Honeycomb disc manufacture.

Open original source ↗

Application summary prepared by Cee. The original source remains the authority for its methods and findings.

SEMICON EUROPA · 10–13 NOVEMBER

Bring your process questions.

Meet Jacob, CEE’s Global Sales Director, in Munich with our partner SiSTEM Technology.

Stand C1353 · Messe München
Spin coating, bake and chill, temporary bonding and debonding.

Book a stand meeting →

Mention Jacob from CEE in SiSTEM’s booking form.