Cee® integrates dispense pumps from a wide range of manufacturers to match your material, process, and production needs. We have integrated systems using IDI/CYBOR, Entegris, and many other brands and pump types, including syringe pumps.
The right pump is the one that fits your material and the way you work. Cee® evaluates chemistry, viscosity, dispense volume, flow rate, repeatability, and cycle frequency together, then recommends a practical pump and integration approach.
Selected pump configurations can handle viscosities up to 50,000 cps. Actual capability depends on the pump model, material, and complete fluid path; operating limits are confirmed for your configuration.
Cee® has installed and integrated pumps from IDI/CYBOR, Entegris, and many other manufacturers, across a range of pump types and process requirements.
Have a preferred pump or an existing system? Contact Cee® to discuss its suitability and integration. We can help you choose an option that meets your process needs and customer requirements.
Compare the delivery systems by material viscosity, dispense volume, and how you plan to use them. Select a linked system name to view its details.
Swipe or scroll across the table to see every comparison.
| System & typical use | Viscosity (cps) | Dispense volume (mL) | R&D | Production | Material changeover |
|---|---|---|---|---|---|
| Hand dispenseManual R&D dispensingManual reference option | Any | 0.1–30 | Yes | No | Dispose |
| DSD-1 SyringeSmall batches and frequent material changes30 or 55 mL reservoirs | 1–12,000 | 0.1–50 | Yes | No | Dispose |
| Cartridge DispenseRoutine coating and production73–940 mL reservoirs | 1–3,000* | 0.1–50 | Yes | Yes | Flush and clean |
| Pressure Can DispenseLarger supplies and longer runs1–10 gal / 3.7–37 L reservoirs | 1–3,000* | 0.1–100 | Yes | Yes | Flush and clean |
| Dispense PumpsCurrent pagePrecision delivery in productionPump selected for the application | Up to 50,000; pump dependent | Pump dependent | No | Yes | Flush and clean |
* Cartridge and standard pressure-can systems support up to 5,000 cps with an upgraded valve. Pump capability depends on the selected model. Reservoir capacity and dispense volume are different values; dispense volume is the amount delivered in a dispense.
Provide the material chemistry and viscosity, required dispense volume and flow rate, cycle frequency, substrate size, and process temperature. Include filtration, recirculation, material-changeover, and maintenance needs where applicable.
Share your preferred pump manufacturer or model, or ask Cee® for a recommendation. Reservoir supply, wetted materials, tubing, and the valve or tip are matched to the material and delivery requirements.
Specify the Cee® equipment model and intended fixed or scanning dispense. Pump selection, controls, connections, utilities, and installation space are confirmed for the chosen configuration. AccuScan™ stream and AccuScan™ spray have separate process requirements.
Final specifications and included hardware are defined by the selected pump and integration package.
Need heated dispensing, a special delivery method, or a configuration you don’t see here? Cee® offers custom solutions built around your material, equipment, and process.
See examples of our custom equipment, then contact Cee® to discuss your dispense requirements.
